| Epoxy/Polyester Powder Coatings |
|
|
|
Introduction: Epoxy/Polyester is mainly made of epoxy resin and polyester resin.
Feature: Good mechanical performance.
Smooth, glossy and good film
Excellent corrosion resistance.
Good heat resistance and light resistance than pure epoxy powder
Uses: Coating and decoration of metal (steel or aluminum) items for indoor items
such as electrical appliances, hardware etc
Series of Product: Standard temperature curing products
It could be made to various luster and color
It could be made to various kinds of art texture products,such as flat,
webbing,wrinkle,sandy,hammer tone etc
Physical Property: Density: 1.1-1.8 g/cm,standard temperature curing
Granularity distribution:Varies with different purpose.Average particle size is
28-40um,10um-84um powder >90% Volatility<2%
Applying Condition: Pretreatment:Phosphated Chromated
Coating method:Electrostatic-fluidized bed coating;Corona electrostatic spray
coating;Tribo-electrification coating
Curing condition: 200∑C/10min or 180∑C/15min or 160∑C/20min
Packing: Double pvc bag,net weight is 20KG each carton
Storage: Dry room with good ventilation, Temperture is lowder than 30∑C,avoid direct
sunlight.There are 12 months to maintain under this condition.Expired prod
ucts still cannot be used unless testing results meet the utilization standards
Health and Safety: There are no hazardous ingredients in all the raw materials of powder coatings
and no hazardous gas will be released while using.However,the inhalation of
dusts should be avoilded.An operator should wear an anti-dust mask and try
best to avoid long-term contact with the powder coating.Those coaings sticked
on the skin should be washed by soap |
| release time:2014/2/10 |
|
