| |
| Question£º |
Gun powder amount is not uniform |
| reason£º |
1, powder supply device is not normal in 2, air pressure and stability of the unstable pressure 3, powder conveying pipe is too long |
| resolvent |
1, check whether the product powder into a powder supply device for plug 2, increase pressure and stable pressure 3, minimize the powder conveying pipe is too long |
|
| |
| Question£º |
Spray gun jams |
| reason£º |
In 1, the granular powder mixed with foreign body
In 2, the powder in the nozzle adhesion hardening
3, conveying powder pressure too low |
| resolvent |
In 1, the powder sieve
2, regular cleaning nozzle
3, increase the powder conveying pressure |
|
| |
| Question£º |
The workpiece is not on the powder |
| reason£º |
In 1, the output voltage is insufficient
2, air pressure over a large
In 3, the workpiece derusting not complete
In 4, the workpiece is not grounded. |
| resolvent |
In 1, the output is increased pressure
2, adjust the air
3, thoroughly clean the surface of the workpiece
4, check whether the workpiece grounding |
|
| |
>>
Home
Next
End
Total:1/6Page 3Article/Page Total:18Article
|
