| Introduction : This powder coating is designed for thermal transfer printing technology.The spraying workpiece can form various appearance effects with the thermal transfer technology such as faux-grained woodˇ˘faux¨Cgrained marble etc. It is widely applied for coating of the aluminumˇ˘metal furnituresˇ˘security doors by characteristic of grain clarity,good permeability,high flexible etc.
Physical Property: ˇˇDensity: 1.1-1.8 g/cm³,standard temperature curing
ˇˇ Granularity distribution:Varies with different purpose.
Average particle size is 30-46um,10um-84um powder>90% Volatility<2%
Apply Condition:ˇˇˇˇPretreatment:Pranodising, Shot-blasting
ˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇCoating method:Electrostatic-fluidized bed coating;Corona electrostatic spray
ˇˇˇˇˇˇˇˇˇˇ coating.
Curing condition: 200ˇăC/10min or 180ˇăC/15min
Packing: ˇˇˇˇˇˇˇˇˇˇDouble pvc bag,net weight is 20KG each carton
Storage: ˇˇˇˇˇˇˇˇˇˇDry room with good ventilation, Temperture is lowder than 30ˇăC,avoid direct
ˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇ sunlight.There are 12 months to maintain under this condition.Expired prod
ˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇ ucts still cannot be used unless testing results meet the utilization standards Health and Safety: There are no hazardous ingredients in all the raw materials of powder coatings
ˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇ and no hazardous gas will be released while using.However,the inhalation of
ˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇ dusts should be avoilded.An operator should wear an anti-dust mask and try
ˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇbest to avoid long-term contact with the powder coating.Those coaings sticked
ˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇon the skin should be washed by soap. | 
