Powder coatings with excellent performance, market share steadily improve. Then the powder coatings and paint the traditional advantage where to?

1 to reduce environmental pollution

Along with the environmental protection act in the atmosphere of the volatile organic compounds (VOC ) content in the regulation is more and more strict, coating industry to seek ways to improve coating technology to reduce the pollution of the environment. After a long period of research and testing, finally found " powder " is currently able to achieve the ideal coating technology.

Powder coating does not use organic solvent, water and other volatile solvents, so the powder coatings for inorganic solvent type coating, is greatly reduced because the solvent and the potential safety hazard, as with organic solvent and operators caused by organic solvent poisoning; or because the organic solvent to bring fire. From the last century five, sixty time of powder coatings market so far, has not occurred due to powder coating and cause major accidents.

Powder coating is a one hundred percent solid powder coating, can be completely used automatic spraying. Excessive or super spray powder coating, can be achieved through recovery system for recycling purposes, so the powder coating is almost one hundred percent utilization rate, make the coating industry reduce waste treatment, while the extent of environmental pollution reduced to a minimum.

2 energy saving

The powder coating with a liquid coating energy cost. Liquid coating because of containing volatile organic, causing the volatile volatile into the atmosphere; and the powder coating does not have such waste, greatly reduces energy use

Electrostatic coating machine output and a spray can be thick, need not repeat spraying, also does not need to render lacquer film thickness, in the same case, the use of powder coating painting relatively quickly, can save time cost.

Painting equipment is not needed in the rest time ( SettingTime ), can save the space of equipment. In addition, powder coating curing time is less than the liquid coating, so, can greatly reduce the fuel energy, shortening the painting line, to improve productivity, promote the overall production efficiency.

3 excellent film performance

As long as the direct powder coating spraying on the proper treatment of steel or aluminum, baked to obtain excellent performance of film surface coating, such as persistence, including: rub resistance, impact resistance, adhesion, toughness, corrosion resistance and chemical resistance can wait. While the outdoor powder coating, in addition to the above advantages, including high weatherability and stain resistance. Especially the thicker coating, powder coating a spray can reach 50-300�� m, and the leveling is good, not like solvent coating thick coating will drop down or stagnation phenomenon.

In order to improve powder coating function, can according to customer preferences to adjust the color, gloss and surface flatness performance, even special metal powder coating and some special wrinkles powder coating.

4 considerable economic benefits

For use in powder coatings electrostatic spray painting equipment principle, can be fully automated, without waste of human resources. Even though the need for artificial auxiliary, painting need not long after training, can be sprayed with good film. Powder coating for 100% solid content without adding any solvent, save packing, reducing storage space. During the spraying process, such as spraying adverse position, be in without the use of air gun before baking the blowing, then spray. It is not likely surface flow of paint and lacquer phenomenon, thereby reducing the recoating rework probability. The film forming composition, solvent type coating of approximately 60~65%, and powder coating reached almost 100%, and is not attached to the object by spraying the powder can be recycled. In general, the use of powder coating technology, can improve the production efficiency and economic efficiency.